### 1. Open Bluetooth Settings

Open the **GNOME Launcher** and select **Settings**.
From the sidebar, navigate to **Settings → Bluetooth**.

---

### 2. Bluetooth Console

When the Bluetooth settings window is open, your laptop will automatically begin scanning for nearby Bluetooth devices.
Put your device into **pairing mode** according to its instruction manual.

![Bluetooth Settings](https://cdn.shopify.com/s/files/1/2059/5897/files/5455f700e9-186c236b240dd196a3a8.png?v=1613641775)

---

### 3. Pairing

After approximately 15 seconds, your device should appear in the list of available devices.
Click the device name to initiate pairing.

---

### 4. Verification

Some Bluetooth devices display a verification code to confirm that you’re connecting to the correct device.
If prompted, verify that the code matches and confirm the connection.

---

### 5. Audio Devices

>

> ⚠️ **Note:** When pairing Bluetooth audio devices, you may encounter sound quality issues.
> Follow the steps below to adjust the audio profile if needed.

1. Open the **GNOME Launcher** and select **Settings**.

2. Navigate to **Settings → Sound**.

3. Select your Bluetooth audio device under the **Output** section.

Choose the appropriate audio profile depending on your device type:

Device Type
Recommended Audio Profile

Audio output only
**High Fidelity Playback (A2DP Sink)**

Audio input and output (headset/microphone)
**Headset Head Unit (HSP/HFP)**

![Sound Settings](https://cdn.shopify.com/s/files/1/2059/5897/files/81c9f6bc21-f1ccc4e99747034b0f9f.png?v=1613641820)