The **StarLite Mk V** allows full navigation of the **coreboot CFR (BIOS Settings)** without the need for a keyboard.
You can use the **volume** and **power** buttons to access and adjust BIOS settings — ideal when operating in **tablet mode** or when no external keyboard is connected (via USB-C or the optional magnetic keyboard).

---

## Accessing the BIOS Setup

1. Start with the device **powered off**.

2. Power on the StarLite and **press the Volume Down key** when prompted on screen.
This will open the BIOS setup menu.

---

## Button Functions and Timing

The following controls allow you to navigate the BIOS interface without a keyboard:

---

### Volume Up

Moves the cursor **up** through the available options.

---

### Volume Down

Moves the cursor **down** through the available options.

---

### Volume Up + Volume Down (Simultaneously)

Pressing both buttons at once sends a **“Y” (Yes)** response — typically used to confirm prompts.

---

### Short Power Button Press

A quick press of the **Power button** (less than **0.3 seconds**) acts as the `Enter` key — confirming a selection.

---

### Long Power Button Press

Holding the **Power button** for **0.5 to 2 seconds** acts as a **Back** command — returning to the previous menu.

>

> ⚠️ **Note:** Holding the Power button **longer than 2 seconds** will power off the StarLite.

---

### Hold Power Button (2+ seconds)

Pressing and holding the **Power button** for more than **2 seconds** will **shut down** the device completely.